How To Change Or Write Imei Using Sn Write Tool

Are you using an smartphone or tablet? If yes are you searching for a way to write IMEI on your device? If yes is your answer again, then you have landed on the right page. Here we have provided a step by step tutorial on how to use SN Write Tool to write IMEI on your device.

By following this tutorial, you will be able to write the original IMEI on your smartphone or tablet.

Change Or Write Imei Using Sn Write Tool

Step 1: Make sure that you have the database file of your device as it is required for writing IMEI. If you don’t have it, download stock Rom firmware of your device and get the database file.

Step 2: Ensure that your device has at least 40-50% battery backup in it.

Step 3: Download the MediaTek (Mtk) USB driver for your Android device and install it on your computer. Only by doing this, you will be able to connect your phone or tablet to the computer.

Once you have finished all these prerequisites, you can move forward to the tutorial given below.

How To Use SN Write Tool To Write IMEI On Your SmartPhone

Step 1: To get started, download SN write tool compressed file and extract it to a folder on your computer. Now click on SN Writer.exe to launch the SN Write Tool window.

Using Sn Write Tool

Step 2: Next, in the SN Write Tool window select USB VCOM on the ComPort option.

Using Sn Write Tool

Step 3: Now choose your device type in the Target Type drop down. For example, if you are going to flash IMEI on your smartphone select the Smart Phone option.

Using Sn Write Tool

Step 4: Next, click on System Config and enable Wifi Address, BT Address and IMEI in the Write Option.

Using Sn Write Tool

Step 5: Now enable Dual IMEI in the IMEI Option if you have a Dual SIM device. Or else, leave it as it is.

Using Sn Write Tool

Step 6: Next, click on MD1_DB under Database File and select the MD1_DB of your device. Follow the same procedure and add the AP_DB file. Once done, click on Save button.

Using Sn Write Tool

Step 7: Now in the SN Write Tool main window, click on Start button to launch the Scan Data window.

Using Sn Write Tool

Step 8: Next, in the Scan Data window, enter the IMEI_1, IMEI_2, BT Address (Bluetooth Address) and WiFi Address. Once all the details are entered, click the Ok button.

Using Sn Write Tool

Step 9: Now switch off your device and remove the battery (if is removable). Once done, connect your device to the computer using the original USB detectable data cable. As soon as your device is connected, the IMEI flashing process will begin.

Step 10: Once the IMEI flashing process is finished, you will see Green Pass message as shown in the screenshot below.

Using Sn Write Tool